TM 5-3825-226-24
TRANSMISSION AND TRANSFER GEARS
6.
Connect lubrication line bracket (5) to the
transmission.
7.
Connect the directional and speed selector control
cable (4) to the transmission.
8. Install back-up alarm (6) switch on the bracket on
the transmission.
9.
Install the bolt and nut in battery cable clip (7).
Connect lubrication lines (8) to the input transfer
gear case.
10.
Connect supply lines (9) and (10) to the
transmission.
11. Connect oil cooler line (1 I) to the transmission.
12. Connect pump supply line (12) to the transmission.
13. Fill the transmission with oil to the correct level.
See TM 5-3825-226-10.
end by:
a)install lower drive shaft
3-188
