TM 5-3825-226-24
INPUT TRANSFER GEARS
DISASSEMBLE INPUT TRANSFER
GEARS
Tools Needed
A
B
8B7548
Puller Assembly
1
8B7554
Bearing Cup Puller Attachment
1
8H684
Ratchet Box Wrench
1
5P2970
Spanner Wrench
1
start by:
a)
separation of input transfer gears from trans-
mission
1. Remove bolt (1), washer (2) and flange (3).
2. Remove bolts (5) and use two 3/8"-16 NC forcing
screws and remove cage (4).
3. Use a press and remove the input gear (6) from cage
(4) as shown.
4. Remove the spacer from gear (6).
5. Install two 3/8"-16 NC forcing screws and remove
bearing cone (7) from gear (6).
6. Remove seal (8) and bearing cone (9) from cage (4).
3-190
