TM 5-3825-226-24
EMERGENCY AND PARKING BRAKE CHAMBER
3.
Install base assembly (5), spring and rod
assembly (6) into cylinder (7).
4.
Put chamber into position in tooling (A) and put
it under compression. Install all but two of the
bolts (8). Remove chamber from tooling (A).
5.
Install the other two bolts (10) on each side of
chamber. Install retaining ring (9) on the rubber
boot.
6.
Install two adjusting nuts (12). Install yoke (11)
on the rod.
end by:
a) install emergency and parking brake chamber
3-294
