TM 5-3825-226-24
EMERGENCY AND PARKING BRAKE CHAMBER
6.
Remove large and small springs (10) from the
rod. Remove felt and rubber seals (11) from the
bases of the rod. Inspect the two seals and
make replacements if necessary.
7.
Remove rubber boot (13) and O-ring seal (12)
from the base assembly. Check the condition of
the seal. If the seal has damage, use new parts
for replacement.
ASSEMBLE EMERGENCY AND PARKING
BRAKE CHAMBER
Tools Needed
A
8H684
Ratchet Box Wrench
1
8F3672
Plate
1
8B7548
Puller Assembly
1
8B7549
Leg
2
1.
Install a new O-ring seal (1) on base assembly.
Install rubber boot (2) on base assembly.
2.
Install a new rubber and felt seal (4) on base of
the rod. Install small and large springs (3) on
the rod.
3-293
