TM 5-3825-226-24
PARKING BRAKE
INSTALL PARKING BRAKE
Tools Needed
A
1P541
Brake Pliers
1
1.
Connect brake shoes (2) together with spring
(4).
2.
Put brake shoes (2) in position on plate
assembly (3).
3.
Use tool (A) to install two springs (1).
4.
Put lever assembly (5) and the brake group in
position on the output transfer gears case and
install the four bolts and lockwashers to hold
them.
5.
Install flange assembly (6), retainer (7) and bolt
(8). Tighten the bolt to a torque of 80 ± 5 lb. ft.
(110 ± 7 N•m).
6.
Put drum (9) in position on the flange assembly
and install the bolts to hold it.
7.
Connect the parking brake chamber assembly to
the lever assembly. See INSTALL PARKING
BRAKE
CHAMBER
ASSEMBLY
for
the
operation.
8.
Adjust the parking brake. See CONTROL
VALVE FOR PARKING BRAKE in TESTING
AND ADJUSTING section for this adjustment.
3-296
