TM 5-3825-229-14&P
4-17. CLEARANCE/MARKER LIGHTS (cont)
a. Removal.
CAUTION
Lenses can break during removal.
(1)
Remove two screws (1) holding light
assembly (2) to light guard (3).
(2)
Gently pull light assembly (2) and wires
(4) out of guard.
(3)
Cut wires (4) on both sides of crimped
wire connector.
(4)
Remove light assembly (2) and gasket
(10).
b. Disassembly.
(1)
To remove lens (5), insert screwdriver
blade fully under lens flange. Pry carefully
at several points if necessary.
(2)
Remove pre-formed packing (6) from
groove of housing (7).
(3)
Remove lamp (8) from socket (9)
c. Assembly.
(1)
Install lamp (8) in socket (9).
(2)
Install pre-formed packing (6) in groove of housing (7).
(3)
Install lens (5).
d. Installation.
(1)
Connect wires (4), using conductor splices.
(2)
Install light assembly (2) and gasket (10) on guard (3).
(3)
Secure light assembly (2) with two screws (1).
(4)
Connect electrical power and test for proper operation.
4-36
Clearance/Marker Light