TM 5-3825-229-14&P
4-31.
AIR LINES (cont)
b.
Installation.
(1) To install air lines, proceed as follows:
(a)
Install air line in position in system. Refer to Figure 18 of Repair Parts and Special Tools List for
location of air lines.
(b)
Connect air line to correct components in system, using Teflon tape.
(2) Close drain valves.
(3) Pressurize air system.
(4) Check for leakage as follows:
(a)
Coat air line and connections with soapsuds. No leakage is permitted.
(b)
Replace any leaking air line or connections.
4-32.
QUICK RELEASE VALVE (SPRING BRAKE CONTROL VALVE)
THIS TASK COVERS:
a.
Removal c. Testing
b.
Installation
INITIAL SETUP:
Tools Required:
Equipment/Materials Required:
Nomenclature:
Teflon Tape (Item 15, Appendix E)
Soap Solution (Item 12, Appendix E)
General Mechanics
Tags (Item 14, Appendix E)
Tool Kit
Equipment Conditions:
Ref
Conditions
1-10. b. (2)
Air reservoirs drained.
a.
Removal.
(1)
Tag and disconnect air lines (1).
(2)
Remove elbows (2), adapters (6) and pipe plugs (5).
(3)
Remove quick release valve (3) from front reservoir nipple (4) by rotating entire valve counterclockwise.
4-67