TM 5-3825-229-14&P4-50. FUEL TANK (cont)b.Installation(cont).(3)If new tank replaces old tank, install elbows (9 and 10) on hose ends (5 and 6). Do notovertighten. Install drain plug (1).(4)Install intake hose (7) on hose end (5), and secure with clamp (4).(5)Install return hose (8) on hose end (6), and secure with clamp (3).(6)Fill tank with proper grade of diesel fuel.(7)Install engine housing (para. 4-56).4-51. FUEL FILTER AND FUEL LINESTHISTASKCOVERS:a.Removald.Fuel Return Linesb.Installatione.Fuel High Pressure Linesc.Fuel Filter LinesINITIALSETUP:Tools Required:Equipment/Materials Required:Nomenclature:Rags (Item 6, Appendix E)General MechanicsEquipment Conditions:Tool KitRefConditions2-14Engine shut off4-22Battery cables disconnected4-56Engine door removeda.Removal.(1)Clean all dirt from filter (5) and base (1) of filter and surrounding area.(2)Pry fuel filter retaining clips (2) from filter.(3)Remove and discard old filter (5).(4)If filter housing (1) is damaged, remove two screws (3) and flat washers (4). Remove base. Remove retaining clips (2) from base (1).4-106
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business