TM 5-3825-229-14&P
5-6. ENGINE ASSEMBLY
THIS TASK COVERS:
a.
Removal
b.
Installation
INITIAL SETUP:
Equipment/Materials Required:
Tools Required:
Tags (Item 14, Appendix E)
Nomenclature:
Personnel Required: 2
General Mechanics
Equipment Conditions:
Tool Kit
Ref.
Conditions
Crane or lifting device
4-22
Battery cables disconnected
4-50
Fuel lines disconnected
4-55
Muffler removed
4-56
Engine housings removed
a
Removal.
WARNING
Electrical shock hazard exists. Disconnect battery cables (para. 4-22).
(1)
Tag and disconnect electric lines leading from engine relay panel to engine and water spray
system as follows:
(a)
Disconnect wires from spray valve solenoid valves (para. 4-60).
(b)
Disconnect wires from liquid level transmitter (para. 4-24).
(c)
Disconnect cables from engine (para. 4-23).
(d)
Disconnect wires from throttle actuator (para. 4-54).
(e)
Disconnect wires from alternator (para. 4-58).
(f)
Disconnect wires from oil pressure switch and water temperature switch (para. 4-46B).
(g)
Disconnect wire from fuel injection pump (para. 5-16).
(h)
Disconnect two wires from starter (para. 4-59).
(i)
Disconnect wire from glow plug (para. 4-46C).
('j)
Remove engine relay panel (para. 4-12).
5-12