TM 5-3825-229-14&P5-5. SPRINGS AND TORQUE ARMS (cont)a.SpringRemoval(cont).b.SpringInstallation.(1)Carefully lift front spring (5) into position between hangers.. Install two spring rollers (3) in position beneath curves in ends of spring leaf.(2) Install two bolts (2) and nuts (1) to secure rollers beneath spring. Tighten nuts securely, but do not over tighten. Spring rollers must be free to turn.(3) Repeat operations (1) and (2) to install the remaining three springs on the axle frame.(4) Refer to para. 5-4 and install axle assemblies.(5)Check axle alignment as described in para. 5-4. Adjust alignment if necessary.c.TorqueArmRemoval.5-10
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
