TM 5-3825-229-14&P
5-7. CYLINDER HEAD
THIS TASK COVERS:
Equipment Conditions:
a.
Removal
b.
Installation
Ref.
Conditions
INITIAL SETUP:
4-46C
Glow plugs removed
4-56
Engine housing, radiator shroud and
Tools Required
radiator removed
4-57
Fan and fan belt removed
Nomenclature:
5-13
Exhaust manifold removed
5-14
Intake manifold removed
General Mechanics
5-15
Fuel injectors removed
Tool Kit
Personnel Required: 2
a
Removal.
(1)
Remove four rocker cover cap nuts (1).
(2)
Remove four rocker cover cap nut gaskets (2) and discard.
(3)
Remove rocker cover (3) with gasket (4).
(4)
Remove rocker cover gasket (4) and discard.
(5)
Remove two screws (5) and remove stabilizer support (6) from cylinder head. Remove two
screws (7) and remove radiator support (8) and spacer (9) from cylinder head.
5-17