CYLINDER HEAD (cont) - TM-5-3825-229-14P

CYLINDER HEAD (cont) - TM-5-3825-229-14P_261

CYLINDER HEAD (cont) - TM-5-3825-229-14P_263

TM-5-3825-229-14P Distributor Water Self-Propelled 2500 Gallon Capacity Sectionalized and Non-Sectionalized Models 613BWDNS Manual
Page Navigation
244

TM 5-3825-229-14&P 5-7. CYLINDER HEAD (cont) b. Installation (cont). CAUTION Push rods, rocker arms, rocker arm balls, flat washers and rocker arm lock nuts must be installed in the original positions they were removed from. (4) Install four studs (18) and four studs (19). Tighten studs to a torque of 39 Ib-ft (52 Nm) (wet). (5) Install eight push rods (14), eight rocker arms (13), eight rocker arm balls (12), and eight rocker arm locknuts (11). (6) Adjust valve lash (para. 4-47). (7) Install two breathers (10). (8) Install supports (6 and 8) and spacer (9) on cylinder head (20). Secure supports with two screws (7) and two screws (5). (9) Install rocker cover gasket (4) inside rocker cover. 5-20

Privacy Statement
Press Release
Contact