Table 4-1. Organizational Preventive Maintenance Checks and Services (cont)

Table 4-1. Organizational Preventive Maintenance Checks and Services

Section IV. ORGANIZATIONAL TROUBLESHOOTING PROCEDURES

TM-5-3825-229-14P Distributor Water Self-Propelled 2500 Gallon Capacity Sectionalized and Non-Sectionalized Models 613BWDNS Manual
Page Navigation
79

TM 5-3825-229-14&P 4-7. ORGANIZATIONAL PREVENTIVE MAINTENANCE CHECKS AND SERVICES (cont) Table 4-1. Organizational Preventive Maintenance Checks and Services (cont) Q = Quarterly S = Semiannually A = Annually ITEM INTERVAL ITEM TO BE INSPECTED NO. Q S A PROCEDURES 8. MANHOLE ASSEMBLY Inspect manhole covers, cover gaskets, and latching assembly for damage. Replace damaged components as necessary. 9. ENGINE COWLING AND SHROUD AND TOOL BOX Inspect all sheet metal for damage. If damage is found, notify your supervisor. 10. ENGINE Inspect engine for obvious damage or leakage of fuel, oil, or coolant. If damage or leakage is found, notify your supervisor. Service engine (see paragraph 4-46). 11. FUEL PUMP Test fuel pump for acceptable fuel pressure (see para. 4-52). 12. THROTTLE CONTROL Adjust throttle control (see para. 4-54). 13. FAN BELT Adjust fan belt. 14. LANDING LEGS Inspect landing legs for wear and damage. Check for loose or damaged crank. Crank legs up and down. Check for binding between lower and upper leg assemblies. Make sure gears mesh smoothly in both speeds. Check to be sure there is no play in shaft as crank is turned. 15. FRAME Inspect frame for cracks, bent condition and broken welds. If frame is damaged, immediately notify Direct Support Maintenance. 4-5

Privacy Statement
Press Release
Contact