TM 5-3895-370-14&P
G-3. FUEL HOSE ASSEMBLY FABRICATION.
NOTES:
1.
OBTAIN ALL COMPONENTS REQUIRED TO FABRICATE DESIRED HOSE ASSEMBLY (TABLE G-2).
2.
USE A FINE TOOTHED HACKSAW OR SUITABLE CUTTING DEVICE, AND CUT HOSE TO INDICATED
LENGTH.
3.
PLACE FITTING A IN VISE.
4.
SLIDE AND TURN HOSE ON FITTING A UNTIL HOSE BOTTOMS AGAINST FITTING. BACK OFF 1/4 TURN.
5.
PLACE FITTING B IN VISE.
6.
SLIDE AND TURN HOSE ON FITTING B UNTIL HOSE BOTTOMS AGAINST FITTING. BACK OFF 1/4 TURN.
Figure G-2. Fuel Hoses.
Table G-2. Fuel Hose Assemblies and Components.
Hose Assembly
Bulk Hose
Cutoff Length
Fitting
Fitting
Ferrule
Manufacturer's
Part Number
Inches (mm)
A
B
C
Part Number
6LOLA-6FSX-6FSX-47
6LOLA
45 (1143)
284-0610
24-0610
N/A
6LOLA-6FSX-6FSX-24
6LOLA
24 (610)
284-0610
284-0610
N/A
6LOLA-6FSX-BLANK-41
6LOLA
41 (1041)
284-0610
N/A
N/A
G-3
