TM 5-3895-370-14&P
4-33. INTAKE COVER REPLACEMENT (CONT).
b.
Installation.
(1)
Install gasket (7) and intake cover (3) on
cylinder head (8).
NOTE
Apply pipe thread sealant to threads
of six screws prior to installation.
(2)
Install wire harness (6), two clamps (5),
and 10 screws (4) on intake cover (5).
Tighten screws 18 lb-ft (24 Nm).
NOTE
Follow-on maintenance:
·
Install injector fuel lines (para 4-41).
·
Install front engine panel (para 3-6).
END OF TASK
4-68
