TM 5-3895-370-14&P
4-35. ACCESS DRIVE COVER REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Condition
Tool kit, general mechanic's: automotive
TM or Para
Condition Description
Wheels chocked.
Wrench, torque
Para 2-10
Extension jack lowered.
Para 3-6
Front engine panel
Materials/Parts
removed.
Compound, sealing (item 16, Appendix E)
Gasket
a.
Removal.
(1) Remove two screws (1) and cover (2) from gear
housing (3).
(2) Remove and discard gasket (4) from cover (2).
b.
Installation.
WARNING
Adhesive sealant, MIL-S-46163, can
damage your eyes. Wear safety
goggles/glasses when using; avoid
contact with eyes. If sealant contacts
eyes, flush eyes with water and get
immediate medical attention.
(1)
Apply adhesive sealant to one side of
gasket (4) and position same side on
cover (2).
(2)
Install cover (2) on gear housing (3) with
two screws (1). Tighten screws 32 lb-ft
(43 Nm).
NOTE
Follow-on maintenance: Install front
engine panel (para 3-6).
END OF TASK
4-71
