TM 5-3895-370-14&P
4-36. FUEL LIFT PUMP REPLACEMENT (CONT).
(3)
Inspect diaphragm by blocking inlet with
finger and pressing lever. If lifting pump
suction bleeds down, replace lifting pump.
c.
Installation. Install gasket (3) and lift pump (2)
on cylinder block (4) with two screws (1).
Tighten screws 18 lb-ft (24 Nm).
NOTE
Follow-on maintenance:
·
Install fuel lines and fitting on lift
pump (para 4-41).
·
Bleed fuel system (para 4-42).
·
Install front engine panel (para
3-6).
END OF TASK
4-74
