TM 5-3895-370-14&P
(5)
Loosen clamp (6) and remove hose (7)
and air intake pipe (5) from intake cover
(8).
(6)
Loosen clamp (9) and remove hose (7)
from air intake pipe (5).
(7)
If damaged, remove two clamps (6 and 9)
from hose (7).
b.
Installation.
(1)
If removed, install two clamps (6 and 9) on
hose (7). Tighten clamps loosely.
(2)
Install hose (7) on air intake pipe (5) and
tighten clamp (9) 6 lb-ft (8 Nm).
(3)
Install hose (7) on intake cover (8) and
tighten clamp (6) 6 lb-ft (8 Nm).
(4)
If removed, install two clamps (1) on
elbow hose (2). Partially tighten clamps.
(5)
Install elbow hose (2) on air intake pipe (5)
(6)
Install air cleaner (4) on elbow hose (2)
and tighten two clamps (3) 6 lb-ft (8 Nm).
(7)
Tighten two clamps (1) on elbow hose (2)
6 lb-ft (8 Nm).
NOTE
Follow-on maintenance: Install front and rear engine panels (para 3-6).
END OF TASK
4-79