TM 5-3895-370-14&P
NOTE
Record scribe mark on top of filter
head alining with cylinder head for
correct installation.
(1) Remove nut (1) and filter head (2) from cylinder
head (3).
(2) Remove and discard preformed packing (4) from
filter head (2).
(3) Remove preformed packing (5) and adapter (6)
from cylinder head (3). Discard preformed
packing.
b. Installation.
(1) Install adapter (6) and preformed packing (5) on
cylinder head (3). Tighten adapter 24 lb-ft (32
Nm).
(2) Lubricate preformed packing (4) and center hole
in filter head (2) with engine oil. Install preformed
packing on filter head.
(3) Install filter head (2) with nut (1). Tighten nut 24
lb-ft (32 Nm).
NOTE
Follow-on maintenance:
·
Bleed fuel system (para 4-42).
·
Install fuel filter and water separator
(para 4-44).
·
Install front engine panel (para 3-6).
END OF TASK
4-117