TM 5-3895-370-14&P
a.
Removal.
(1)
Remove nut (1), lockwasher (2), two
washers (3), screw (4), and clamp (5) from
bracket (6). Discard lockwasher.
(2)
Loosen screw (7) and pull cable (8) from
control lever (9).
(3)
Remove cable (8) from clamp (5).
(4)
If damaged, remove cotter pin (10), control
rod end (11), and washer (12) from control
lever (9). Discard cotter pin.
(5)
If damaged, remove nut (13), lockwasher
(14), screw (15), washer (16), and bracket
(6) from support plate (17). Discard
lockwasher.
4-119