TM 5-3895-370-14&P
(3)
Inspect radiator support and shroud for
rust and deformation.
(4)
Replace all parts failing inspection.
c.
Installation.
(1)
If removed, install two clamps (10) on
overflow hose (11).
(2)
Install cap (13) and overflow hose (11) on
radiator (4).
(3)
Install radiator shroud (12), overflow hose
(11), two clamps (10), eight washers (9),
and screws (8) on radiator (4).
(4)
Install radiator (4) on radiator support (3)
with eight washers (7) and screws (6).
WARNING
Radiator assembly weighs 85 lbs (39
kgs). Attach suitable lifting device
prior to removal or installation to
prevent possible injury to personnel.
(5)
While mechanic operates suitable lifting
device, assistant positions radiator support
(3) and radiator (4) on engine frame (5).
(6)
Install radiator support (3) on engine frame
(5) with seven washers (2) and screws (1).
Tighten screws 11 lb-ft (15 Nm).
NOTE
Follow-on maintenance:
Install hydraulic fluid cooler (para 4-139).
Install coolant hoses (para 4-57).
Install engine hood (para 4-118).
END OF TASK
4-135
