TM 5-3895-370-14&P
b.
Fill.
CAUTION
Do not fill coolant system with water
only. Use ethylene glycol mixture
with water. Failure to do so will result
in damage to engine.
(1)
Remove cap (1) and fill radiator (2) with a
50
percent
mixture
of
water
and
antifreeze. Coolant capacity is 7.4 gal (28
l). If temperature is below -34 degrees F
(-37 degrees C), mix 40% water and 60%
antifreeze.
(2)
Start engine and allow to warm up.
Loosely install radiator cap (1).
(3)
Repeat step (1) until cooling system is full.
(4)
When cooling system is full, securely
tighten radiator cap (1).
NOTE
Follow-on maintenance:
Install front and rear engine panels
(para 3-6).
· Install front fan guard (para 4-54).
END OF TASK
4-141
