TM 5-3895-370-14&P
4-75. JUNCTION BOX REPLACEMENT (CONT).
b. Installation.
(1)
Install junction box (5) on main frame (13) with
two screws (12), washers (11), lockwashers
(10), and nuts (9).
(2)
Install junction/breaker cable (8) in junction box
(5).
(3)
Install cable tie (7).
(4)
Install five wires (6) on five terminals (2).
(5)
Install resistor/junction cable (4) in junction box
(5).
(6)
Install cable tie (3).
(7)
Install five wires (1) on five terminals (2).
NOTE
Follow-on maintenance: Install 12-volt cable in junction box (para 4-91).
END OF TASK
4-196
