TM 5-3895-370-14&P
b. Disassembly.
(1)
Remove grommet (1) from breaker box (2).
NOTE
This step shows replacement of one
circuit breaker. The procedure is the
same for all five circuit breakers.
(2)
Remove two nuts (3), lockwashers (4), and
circuit breaker (5) from breaker box (2).
Discard lockwashers.
c. Assembly
(1)
Install circuit breaker (5) in breaker box (2) with
two lockwashers (4) and nuts (3).
(2)
Install grommet (1) on breaker box (2).
d. Installation.
(1)
Install two wire harnesses (4 and 23) in breaker
box (8).
(2)
Install two wires (32), lockwashers (31), and
nuts (30) on two top circuit breakers (14).
(3)
Install two wires (29), lockwashers (28), and
nuts (27) on two bottom circuit breakers (18).
(4)
Install two wires (26), lockwasher (25), and nut
(24) on bottom circuit breaker (19).
(5)
Install cable tie (22) on two wire harnesses (23
and 4).
4-199
