TM 5-3895-370-14&P
4-77. MARKERLIGHT/REFLECTORS REPLACEMENT (CONT).
NOTE
This task shows replacement of one
rear reflector. The procedure is the
same for all front and rear reflectors.
(2)
Remove reflector as follows:
(a)
Remove two screws (12).
(b)
Remove reflector (13) from bumper (11)
b. Installation.
(1)
Install markerlight as follows:
(a)
Install two grommets (10) on bumper (11).
(b)
Install gasket (9), markerlight assembly
(2), and two screws (8).
(c)
Connect snap plug connectors (7) to wire
harness (6) and install spiral cable wrap
(5).
(d)
Install
two
lamps
(4)
in
markerlight
assembly (2).
(e)
Install
preformed
packing
(3)
on
markerlight assembly (2).
(f)
Install markerlight cover (1) on markerlight
assembly (2).
(2)
Install reflector as follows:
(a)
Install reflector (13) on bumper (11).
(b)
Install two screws (12).
NOTE
Follow-on maintenance: Connect
negative battery cable (para 4-84).
END OF TASK
4-202
