TM 5-3895-370-14&P
4-78. IDENTIFICATION/CLEARANCE LIGHTS ASSEMBLY REPLACEMENT (CONT).
(5)
Install identification/clearance lights assembly (2), four screws (11), and locknuts (10) on support bracket
assembly (12).
(6)
Install wiring harness (1) on identification/clearance lights assembly (2) as follows:
(a)
Install three clamps (9) and wiring harness (1), three lockwashers (8), and nuts (7).
(b)
Connect three wire connectors (4) from wire harness (1) to bar light assembly (6) and two clearance lights
(5).
NOTE
Follow-on maintenance: Connect negative battery cable (para 4-84).
END OF TASK
4-206
