TM 5-3895-370-14&P
NOTE
Install washers between taillight bracket assembly and bumper.
(2)
If removed, install screw (16), washer (15), and nut (14).
(3)
Install four washers (12), taillight assembly (11), and nut (10).
(4)
Install four screws (9), four lockwashers (8), and nut (7).
(5)
Connect four wire connectors (6) and install spiral cable wrap (4) on wire harness (5).
(6)
Install two ground wires (3), lockwasher (2), and nut (1).
NOTE
Follow-on maintenance: Connect negative battery cable (para 4-84).
END OF TASK
4-209