TM 5-3895-370-14&P
NOTE
Step (3) shows replacement of one
clearance light. The step is the same
for both clearance lights.
(3)
Remove two nuts (13), lockwashers (14), screws
(15), and clearance and markerlight (5) from
identification/clearance
lights
assembly
(2).
Discard lockwashers.
(4)
Remove two nuts (16), lockwashers (17), screws
(18),
and
bar
light
assembly
(6)
from
identification/clearance lights assembly (2).
Discard lockwashers.
(5)
Pry lens cover (19) off bar light (20).
(6)
Remove lamp (21) from bar light (20).
b. Installation.
(1)
Install lamp (21) in bar light (20).
(2)
Install lens cover (19) on bar light (20).
(3)
Install bar light assembly (6), two screws (18),
lockwashers (17), and nuts (16).
(4)
Install clearance and markerlight (5), two screws
(15), lockwashers (14), and nuts (13) on
identification/clearance lights assembly (2).
4-205
