TM 5-3895-370-14&P
4-148. WATER TEMPERATURE SENSOR/GAGE REPLACEMENT (CONT).
NOTE
Tag and mark all wires before
removal.
(9)
Loosen nut (17) and remove two wires (18) from
water temperature gage (19).
(10)
Remove two assembled nuts (20), wires (21),
bracket (22), two isolators (23), and water
temperature gage (19) from gage panel (24).
Discard isolators.
(11)
Cut plastic ties as necessary and remove oil
extension hose (13) from enclosure (25).
(12)
Remove extension wire harness (15) from
enclosure (25).
(13)
Remove sensor lead (6) from conduit (11).
(14)
Remove conduit (11) from enclosure (25).
(15)
Remove sensor (1) through enclosure (25).
4-416
