TM 5-3895-370-14&P
(16)
Remove sensor (1) and lead (6) through gage
panel (24).
b. Cleaning/Inspection.
(1)
Clean out conduit with brush and wipe off wires
and connectors with lint-free cloth.
(2)
Inspect sensor lead and conduit for cracks,
cuts, and bare spots.
(3)
Inspect connectors for fraying and wear.
(4)
Replace all parts failing inspection.
c. Installation.
(1)
Install sensor (1) and lead (6) through gage
panel (24).
(2)
Install sensor (1) through enclosure (25).
(3)
Install conduit (11) in enclosure (25).
(4)
Install sensor lead (6) in conduit (11).
(5)
Install extension wire harness (15) in enclosure
(25).
NOTE
Install plastic ties as necessary.
(6)
Install oil extension hose (13) in enclosure (25).
4-417
