TM 5-3895-370-14&P
4-148. WATER TEMPERATURE SENSOR/GAGE REPLACEMENT (CONT).
(7)
Install water temperature gage (19) on gage
panel (24) with two isolators (23), bracket (22),
two wires (21), and assembled nuts (20).
(8)
Install two wires (18) on water temperature gage
(19) and tighten nut (17).
(9)
Connect extension wire harness (15) on panel
connector (16).
NOTE
Remove plug from oil extension hose
prior to installation.
(10)
Install oil extension hose (13) on oil pressure
gage (14).
4-418
