TM 5-3895-370-14&P
4-156. GAGE PANEL SUPPORT REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Condition
Tool kit, general mechanic's: automotive
TM or Para
Condition Description
Wheels chocked.
Materials/Parts
Para 2-10
Jackstand and
Lockwashers (4)
jackstands lowered.
Lockwashers (4)
Para 4-68
Gage panel removed.
a.
Removal.
(1)
Remove two nuts (1), lockwashers (2), flat
washers (3), screws (4), washers (5), and
mounting bracket (6) from two pipe support
halves (7). Discard lockwashers.
(2)
Remove two nuts (8), lockwashers (9), screws
(10), washers (11), and two pipe support halves
(7) from pipe support base (12). Discard
lockwashers.
(3)
Remove four screws (13), lockwashers (14), and
pipe support base (12) from bituminous pump
base (15). Discard lockwashers.
b.
Installation.
(1)
Install pipe support base (12) on bituminous
pump base (15) with four lockwashers (14) and
screws (13).
(2)
Install two pipe support halves (7) on pipe
support base (12) with two washers (11), screws
(10), lockwashers (9), and nuts (8).
(3)
Install mounting bracket (6) on pipe support (7)
with two washers (5), screws (4), flat washers
(3), lockwashers (2), and nuts (1).
NOTE
Follow-on maintenance: Install gage
panel (para 4-68).
END OF TASK
4-446
