TM 5-3895-370-14&P
4-157. TENSION SPRING REPLACEMENT/REPAIR (CONT).
(2)
Remove tension spring (1) from side joint section
(3).
b.
Disassembly.
(1)
Remove spring (1) from stud (2).
(2)
Remove stud (2), two lockwashers (3), and two
nuts (4) as an assembly from spring (5).
(3)
Remove two lockwashers (3) and nuts (4) from
stud (2). Discard lockwashers.
(4)
Loosen nut (6) and remove eye bolt (7), nut (6),
and lockwasher (8) from spring (1). Discard
lockwasher.
(5)
Remove nut (6) from eye bolt (7).
(6)
Remove two end plugs (9) from spring (1).
(7)
Repeat Steps (4) thru (6) to disassemble
remaining spring.
4-448
