TM 5-3895-370-14&P
4-158. SIDE JOINT SECTION REPLACEMENT (CONT).
(2)
Remove hair pin (6) from spraybar center section
(5) and side joint section (7).
(3)
Remove nut (8), eye bolt (9), and wire rope
assembly (10) from side joint on/off bar (11).
(4)
Loosen nut (12) on screw (13).
(5)
Turn nut (14) counterclockwise and remove
spring (15) and lockwasher (16) from screw (13).
Discard lockwasher.
(6)
Remove two nuts (12 and 17) and screw (13)
from side joint on/off bar (11).
(7)
If damaged, remove nut (18), eye bolt (19), and
wire rope assembly (10) from upper on/off bar
(20).
NOTE
If spring is not damaged, skip Steps
(8) thru (10). Otherwise, perform
steps.
(8)
Loosen two nuts (21) on screw (22).
(9)
Remove spring (15) and lockwasher (23) from
screw (22). Discard lockwasher.
(10)
Remove two nuts (21 and 24) and screw (22)
from upper on/off bar (20).
4-452
