TM 5-3895-370-14&P
(4)
Lower side joint section (7) from spraybar center
section (5).
(5)
Install wire rope assembly (4), eye bolt (26), and
nut (25) on side joint section (7).
NOTE
If spring was not removed, skip Steps
(6) thru (9). Otherwise, perform steps.
(6)
Install screw (22) and two nuts (21 and 24) on
upper on/off bar (20).
(7)
Install lockwasher (23) and spring (15) on screw
(22).
(8)
Tighten two nuts (21) on screw (22).
(9)
If removed, install wire rope assembly (10), eye
bolt (19), and nut (18) on upper on/off bar (20).
4-455
