TM 5-3895-370-14&P
4-158. SIDE JOINT SECTION REPLACEMENT (CONT).
(10)
Install screw (13) and two nuts (12 and 17) on
side joint on/off bar (11).
(11)
Install lockwasher (16) and spring (15) on screw
(13). Tighten screw (13).
(12)
Tighten two nuts (12 and 14) on screw (13) while
holding spring (15).
(13)
Install wire rope assembly (10), eye bolt (9), and
nut (8) on side joint on/off bar (11).
(14)
Raise and install side joint section (7) and hair pin
(6) on spraybar center section (5).
(15)
If removed, install wire rope assembly (4) on
spraybar center section (5) with thimble (3), two
clamps (2), and four nuts (1).
NOTE
Follow-on maintenance:
·
Install tension spring (para 4-157).
·
Connect negative battery cable
(para 4-84)
END OF TASK
4-456
