TM 5-3895-370-14&P
4-159. SWING JOINT ASSEMBLY REPLACEMENT.
This task covers:
a. Removal
b. Installation
INITIAL SETUP
Tools
Equipment Condition
Tool kit, general mechanic's: automotive
TM or Para
Condition Description
Wheels chocked.
Materials/Parts
Para 2-10
Extend jack and
Gaskets (3)
jackstands.
Lockwashers (4)
Para 4-84
Negative battery cable
Locknuts (2)
disconnected.
Fiber washers (4)
Para 4-158
Side joints removed.
Personnel Required
MOS62B, Construction equipment repairer (2)
a. Removal.
NOTE
There is a left and right swing joint
assembly.
The
following
steps
remove the left swing joint assembly.
To remove the right swing joint
assembly repeat all steps below.
(1)
Remove four screws (1), fiber washers (2), two
spray valve assemblies (3), and gaskets (4) from
center section (5). Discard fiber washers.
Discard gaskets.
(2)
Remove two lock nuts (6), screws (7), and
washers (8). Discard locknuts.
(3)
Remove two nuts (9), screws (10), and washers
(11) from center section (5) and swing joint
assembly (12).
(4)
With
aid
of
assistant,
remove
swing
joint
assembly (12) and gasket (13) from center
section (5). Discard gasket.
4-457
