TM 5-3895-370-14&P
5-17. ENGINE OIL SEALS REPLACEMENT (CONT).
b. Installation.
WARNING
Adhesive sealant, MIL-S-46163, can
damage your eyes. Wear safety
goggles/glasses when using; avoid
contact with eyes. If sealant contacts
eyes, flush eyes with water and get
immediate medical attention.
NOTE
·
Both front and rear oil seals are
installed the same way. Rear oil
seal shown.
·
Pilot installation tool is supplied
with replacement seals.
·
Apply
se aling
compound
to
outside diameter of seal.
(1)
Insert rear seal (1) in pilot and install in engine
(2). Remove pilot.
(2)
Seat rear seal (1) using installation tool.
(3)
If new front seal was installed, apply coat of
sealing compound to outside diameter of new
seal.
(4)
Repeat steps (1 and 2) for front seal.
NOTE
Follow-on maintenance:
Install flywheel (para 5-20).
Install crankshaft pulley (para 5-21).
END OF TASK
5-40
