TM 5-3895-370-14&P
5-31.
FUEL INJECTION PUMP REPLACEMENT (CONT).
(7)
If removed, install brace (6) on engine block (8)
with two screws (7). Tighten screws 18 lb-ft (24
Nm).
(8)
Install screw (5) on injection pump (3) and brace
(6).
(9)
If installing new injection pump (3):
(a)
Take up gear lash by rotating pump
against direction of gear rotation.
(b)
Tighten three nuts (14) 18 Ib-ft (24 Nm).
Permanently mark new injection pump to
aline with mark on gear housing.
(10)
If installing used injection pump (3), rotate
injection pump to aline match marks and tighten
three nuts (14) 18 lb-ft (24 Nm).
(11)
Loosen timing lock screw (2) and position timing
lock washer (4) in unlock position. Tighten
screw 15 lb-ft (20 Nm).
5-80
