TM 5-3895-370-14&P
5-31.
FUEL INJECTION PUMP REPLACEMENT (CONT).
(3)
Turn flywheel while depressing timing pin (4).
(4)
Disengage timing pin (4).
b.
Removal.
NOTE
Hold adjoining (camshaft) gear while
measuring backlash. This is to
prevent reading from both gears.
(1)
Measure injection pump gear (1) backlash at
position A. Normal measurement is 0.003 to
0.013 in. (0.076 0.330 mm). If measurement is
above or below normal, replace gear.
5-76
