TM 5-3895-370-14&P
5-30.
FUEL INJECTOR REPLACEMENT.
This task covers:
a. Removal
b. Cleaning/Inspection
c. Installation
INITIAL SETUP
Test Equipment
Materials/Parts-Continued
Injector gage pump
Solvent, drycleaning (item 50, Appendix E)
Washer, copper (4)
Tools
Gasket (4)
Shop equipment, fuel and electrical system,
engine: field maintenance basic, less power
Equipment Condition
TM or Para
Condition Description
Materials/Parts
Para 4-41
Fuel injector lines
Brush, brass wire (item 4, Appendix E)
and return lines removed.
Fluid, calibrating (item 20, Appendix E)
Compound, anti-seize (item 13, Appendix E)
General Safety Instructions
Oil, engine lubricating (item 31, Appendix E)
If engine has previously been in operation, allow
Oil, penetrating (item 35, Appendix E)
time for cooling before performing procedure.
a.
Removal
WARNING
Fuel is very flammable and can explode easily. To avoid serious injury or death:
·
Keep fuel away from open flame or any spark (ignition source).
·
Keep at least a B-C fire extinguisher within easy reach when working with fuel
or on a fuel system.
·
Do not work on fuel system when engine is hot; fuel can be ignited by a hot
engine.
·
Post signs that read "NO SMOKING WITHIN 50 FEET" when working with open
fuel, fuel lines or fuel tanks.
5-71
