TM 5-3895-370-14&P
c.
Installation.
(1)
Install gasket (10) and sump tube (9) with three
screws (8). Tighten screws 18 Ib ft (24 Nm).
WARNING
Adhesive sealant, MIL-S-46163, can
damage your eyes. Wear safety
goggles/glasses when using; avoid
contact with eyes. If sealant contacts
eyes, flush eyes with water and get
immediate medical attention.
NOTE
Apply sealing compound to both
sides
of
oil
pan
gasket
before
installation.
(2)
Install gasket (6) with printed side on engine
block (7).
(3)
Install oil pan (5) with 28 washers (4) and
screws (3). Tighten screws 18 lb-ft (24 Nm).
(4)
Install washer (2) and plug (1). Tighten plug 30
lb-ft (41 Nm).
NOTE
Follow-on maintena nce:
Install engine oil sampling line to oil pan (para
4-32).
Install engine (para 5-12).
END OF TASK
5-67