TM 5-3895-370-14&P
5-30. FUEL INJECTOR REPLACEMENT (CONT).
NOTE
This task shows replacement of one
injector. The procedure is the same
for all four injectors.
(1)
If
rust
has
formed
on
injector
(1),
use
penetrating oil on nut (2) and allow three
minutes for soaking.
(2)
Tap injector (1) with drift pin to loosen any rust.
(3)
While holding injector (1), loosen nut (2) and
remove injector from cylinder head (3).
(4)
Remove and discard copper washer (4) and
gasket (5) from injector (1).
(5)
Remove nut (2) from injector (1).
5-72