TM 5-3895-370-14&P
5-30.
FUEL INJECTOR REPLACEMENT (CONT).
c
Installation.
CAUTION
Do not get anti-seize compound in
bores of injector. Failure to comply
may result in damage to fuel system.
(1)
Apply anti-seize compound on threads of nut (2)
and on injector (1) where nut is installed.
(2)
Install nut (2) on injector (1).
(3)
Apply drop of lubricating oil on copper washer
(4) and install copper washer and gasket (5) on
injector (1).
CAUTION
If injector is not held in position when
installing nut, damage will result to
injector.
(4)
Install injector (1) in cylinder head (3). Tighten
nut 44 lb-ft (60 Nm).
NOTE
Follow-on maintenance: Install fuel injector lines and return lines (para 4-41).
END OF TASK
5-74
