TM 5-3895-370-14&P
5-36. STARTER REPAIR (CONT).
(2)
Matchmark and remove two screws (8), end cap
(9), washer (10), and coil housing (11) from
drive housing (6).
(3)
If damaged, remove bushing (12) and wick (13).
(4)
Remove locknut (14), two special washers (15),
screw (16), and special washer (17) from drive
housing (6). Discard locknut.
(5)
Loosen two lower assembled screws (18), and
remove two assembled screws from drive
housing (6).
(6)
Remove armature (19) with plunger (7), rubber
boot (20), and lever (21).
(7)
Remove pin (22) and disassemble plunger (7)
and lever (21).
(8)
Remove bushing (23) from drive housing (6).
5-98