TM 5-3895-370-14&P
5-36. STARTER REPAIR (CONT).
(12)
Install bushing (30) in center bearing plate (29).
(13)
Install center bearing plate (29), washer (28),
bendix (27), collar (26), retaining ring (25), and
collar (24) on armature (19).
(14)
Install bushing (23) in drive housing (6).
(15)
Assemble lever (21) and plunger (7) with pin
(22).
(16)
Position plunger (7), lever (21), and rubber boot
(20) on armature (19) and install in drive housing
(6). Tighten two lower assembled screws (18).
(17)
Fully seat rubber boot (20) in drive housing (6)
and install two upper assembled screws (18).
(18)
Install special washer (17), screw (16), two
special washers (15), and locknut (14) in drive
housing (6).
5-106