TM 5-3895-370-14&PWARNING·Hydraulic fluid is very slippery and can cause falls. To avoid injury, wipe up spilledfluid with rags.·Hydraulic variable-speed pump weighs 57 lbs (26 kg). Attach suitable lifting deviceprior to removal/installation. Failure to do so may result in injury or death topersonnel.CAUTIONEquipment damage may occur ifhydraulic lines and fittings are notplugged and capped after removal.NOTE· Tag and mark all hydraulic lines before removal.· Place suitable container beneath pump to catch spilling hydraulic fluid.(2)Disconnect six hoses (5 through 10) fromvariable-speed pump (11).(3)Attach suitable lifting device to variable-speedpump (11).NOTEOutput shaft may come out onvariable-speed pump shaft.(4)Remove two screws (12), lockwashers (13), andvariable-speed pump (11) from flywheel coverassembly (14). Discard lockwashers.5-109
Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business
