TM 5-3895-370-14&P
5-37. HYDRAULIC VARIABLE-SPEED PUMP REPLACEMENT/REPAIR (CONT).
NOTE
Pump housing contains a recess to
allow pins to be driven free of
trunnion shaft.
(21)
Using punch drive, remove four pins (32) out of
swashplate (33) and two trunnion shafts (34).
(22)
Remove two trunnion shafts (34) by driving
trunnion shafts out of swashplate (33) from
pump housing (20).
(23)
Pull pump shaft (30) with bearing cone (35) as
an assembly from pump housing (20).
(24)
Remove swashplate (33) from pump housing
(20).
(25)
Press bearing cone (35) off pump shaft (30).
(26)
Press bearing cup (36) out of pump housing
(20).
(27)
Remove two seals (37) and two bearings (38)
from pump housing (20).
(28)
Remove screw (39), sealing washer (40), and
washer (41) from pump housing (20).
(29)
Press seal (42) out of pump housing (20).
5-114
