TM 5-3895-370-14&P
5-37. HYDRAULIC VARIABLE-SPEED PUMP REPLACEMENT/REPAIR (CONT).
e. Installation.
NOTE
Apply hydraulic fluid to all preformed
packings before installation.
(1)
Install two preformed packings (24) on two
reducers (23).
(2)
If removed, install two reducers (23) on tees (21
and 22).
(3)
Install two tees (21 and 22) and reducers (23) on
variable-speed pump (11).
(4)
Install two preformed packings (19 and 20) on
two 450 elbows (17 and 18).
(5)
Install two 45 elbows (17 and 18) on variable-
speed pump (11). Tighten two nuts (15 and 16).
(6)
Install variable-speed pump (11) on flywheel
cover assembly (14) with two lockwashers (13)
and screws (12). Tighten screws 45 lb-ft (61
Nm).
NOTE
Refer to tags to properly install
hydraulic lines.
(7)
Connect six hoses (5 through 10) on variable-
speed pump (11).
5-120
