TM 5-3895-370-14&P
5-38. HYDRAULIC FIXED-SPEED PUMP REPLACEMENT/REPAIR (CONT).
(3)
Loosen two nuts (8) and remove two
elbows (9) from fixed-speed pump (3).
(4)
Remove and discard two preformed
packings (10) from two elbows (9).
b. Disassembly.
(1)
Remove four screws (1), lockwashers (2),
cover (3), and flange (4) from housing (5).
Discard lockwashers.
(2)
Remove retaining ring (6) and shaft seal (7)
from flange (4). Discard shaft seal.
(3)
Remove and discard two preformed
packings (8) from housing (5).
(4)
Remove and discard four preformed
packings (9) from cover (3) and flange (4).
(5)
Remove two bearing assemblies (10), idler
gear (11), and drive gear (12) from
housing (5).
(6)
If damaged, remove four dowel rings (13)
from housing (5).
c. Cleaning/Inspection.
(1)
Clean all parts with hydraulic fluid and dry
with lint-free cloth.
5-124
